CLUTCH PEDAL SWITCH INSPECTION

PROCEDURE

  1. INSPECT CLUTCH START SWITCH ASSEMBLY

    1. D011485E48

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Switch Condition

      Specified Condition

      1 - 2

      On (pushed)

      Below 1 Ω

      Off (free)

      10 kΩ or higher
      Table 1. Text in Illustration

      *1

      7.65 to 8.35 mm (0.301 to 0.329 in.)

      If the result is not as specified, replace the clutch start switch assembly.