REAR CENTER SEAT OUTER BELT ASSEMBLY(for 60/40 Split Double-folding Seat Type RH Side) REMOVAL

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

PROCEDURE

  1. REMOVE REAR NO. 1 SEAT ASSEMBLY RH

    1. Remove the rear No. 1 seat assembly RH (Click here).

  2. REMOVE NO. 1 SEATBACK BOARD SUB-ASSEMBLY

    Click here

  3. REMOVE REAR SEAT INNER RECLINING COVER RH

    Click here

  4. REMOVE REAR CENTER SEAT INNER BELT ASSEMBLY

    Click here

  5. REMOVE CENTER SEATBACK COVER SUB-ASSEMBLY

    Click here

  6. REMOVE CENTER SEATBACK ASSEMBLY

    Click here

  7. REMOVE CENTER NO. 2 SEATBACK COVER

    Click here

  8. REMOVE REAR SEATBACK LOCK COVER RH

    Click here

  9. REMOVE REAR SEATBACK LOCK ASSEMBLY RH

    Click here

  10. REMOVE REAR SEATBACK STOP BUTTON GROMMET

    Click here

  11. REMOVE REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY

    Click here

  12. REMOVE SEAT BELT ANCHOR COVER CAP

    Click here

  13. REMOVE REAR SEAT SHOULDER BELT COVER

    Click here

  14. REMOVE REAR SEATBACK LOCK STRIKER PROTECTOR

    Click here

  15. REMOVE REAR SEAT LOCK STRIKER

    Click here

  16. REMOVE SEATBACK COVER WITH PAD

    Click here

  17. REMOVE REAR SEATBACK EDGE PROTECTOR

    Click here

  18. REMOVE REAR SEAT SHOULDER BELT GUIDE

    Click here

  19. REMOVE REAR CENTER SEAT LAP TYPE BELT ASSEMBLY

    B241741

    1. Remove the nut and bolt, and then detach the 2 claws and remove the seat belt.