EGR GAS TEMPERATURE SENSOR INSTALLATION

PROCEDURE

  1. INSTALL EGR GAS TEMPERATURE SENSOR

    1. A354704C01

      *a

      Torque Wrench Fulcrum Length

      Using a 14 mm union nut wrench, install the EGR gas temperature sensor.

      Specified tightening torque

      30 N*m

      306 kgf*cm

      22 ft.*lbf

      Note:

      If the EGR gas temperature sensor is dropped, replace it with a new one.

      Tip:

      • Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.

        Click hereClick here

      • When using a 14 mm union nut wrench (fulcrum length of 25 mm (0.984 in.)) + torque wrench (fulcrum length of 300 mm (11.8 in.)): 28 N*m (286 kgf*cm, 21 ft.*lbf)

    2. Connect the EGR gas temperature sensor connector and slide the white-colored lock to engage it securely.