INTEGRATION RELAY(for Luggage Compartment) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL NO. 3 SEMICONDUCTOR POWER INTEGRATION ECU


    1. B006FNEC01
      B006DHE Rotate in this Direction

      Attach the claw and connect the lever connector.

      Note


      • Make sure the connector terminal is free from oil and grease.

      • Do not subject the No. 3 semiconductor power integration ECU to any impact.

      • Do not use a No. 3 semiconductor power integration ECU that has been dropped.

      • Do not disassemble the No. 3 semiconductor power integration ECU.

      • Be sure to connect the lever connector securely.

    2. B006GB7

      Connect the power source connector.

      Note


      • Make sure the connector terminal is free from oil and grease.

      • Do not subject the No. 3 semiconductor power integration ECU to any impact.

      • Do not use a No. 3 semiconductor power integration ECU that has been dropped.

      • Do not disassemble the No. 3 semiconductor power integration ECU.

    3. B006B2I

      Align the guide and install the No. 3 semiconductor power integration ECU with the nut.

      Note


      • Do not subject the No. 3 semiconductor power integration ECU to any impact.

      • Do not use a No. 3 semiconductor power integration ECU that has been dropped.

      • Do not disassemble the No. 3 semiconductor power integration ECU.

      • B006G7H

        If the removed nut is the same shape as that shown in the illustration, replace it the supplied replacement part.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

  2. INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH

    Click here

  3. INSTALL REAR FLOOR FINISH PLATE

    Click here

  4. INSTALL ROPE HOOK ASSEMBLY

    Click here

  5. INSTALL REAR LUGGAGE COMPARTMENT TRIM COVER

    Click here

  6. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

    Click here

  7. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER (w/o Rear Cooler)

    Click here

  8. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER (w/ Rear Cooler)

    Click here

  9. INSTALL INNER LOWER LUGGAGE COMPARTMENT TRIM COVER

    Click here

  10. INSTALL LUGGAGE COMPARTMENT TRIM BOX (w/o Air Suspension)

    Click here

  11. INSTALL LUGGAGE COMPARTMENT TRIM COVER LH

    Click here

  12. INSTALL LUGGAGE COMPARTMENT FLOOR MAT

    Click here

  13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL


  14. INSTALL TOOL BOX


    1. for 8GR-FKS:

      Click here

    2. for V35A-FTS:

      Click here

  15. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY

    Click here