OIL PRESSURE SWITCH INSTALLATION

PROCEDURE

1. INSTALL ENGINE OIL PRESSURE SWITCH ASSEMBLY

   1. Apply adhesive to 2 or 3 threads of the engine oil pressure switch assembly.

      Adhesive

      TOYOTA Genuine Adhesive 1344, Three Bond 1344 or equivalent.

      Note:

      Do not let adhesive adhere to the oil hole.

   2. Using a 24 mm deep socket wrench, install the engine oil pressure switch assembly.

      15 N*m

      153 kgf*cm

      11 ft.*lbf

      Note:

      Do not start the engine within 1 hour of installation.

   3. Connect the engine oil pressure switch connector.

2. INSPECT FOR OIL LEAK

   Click here