OIL PRESSURE SWITCH INSPECTION

PROCEDURE

  1. INSPECT ENGINE OIL PRESSURE SWITCH ASSEMBLY

    1. Disconnect the engine oil pressure switch connector.

    2. Start the engine.

    3. A201810C01

      *a

      Component without harness connected

      (Engine Oil Pressure Switch Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      1 - Body ground

      Engine stopped

      Below 1 Ω

      Engine idling

      10 kΩ or higher

      If the result is not as specified, replace the engine oil pressure switch assembly.

    4. Connect the engine oil pressure switch connector.