OUTER REAR VIEW MIRROR GLASS INSPECTION

PROCEDURE

  1. INSPECT MIRROR SUB-ASSEMBLY LH

    B341521E01

    1. Check the outer mirror heater operation.

      1. Measure the resistance according the value(s) in the table below.

        Standard Resistance

        Tester Connection

        Condition

        Specified Condition

        1 - 2

        25°C (77°F)

        13.4 Ω

        If the result is not as specified, replace the mirror sub-assembly LH.

  2. INSPECT MIRROR SUB-ASSEMBLY RH

    B341522E01

    1. Check the outer mirror heater operation.

      1. Measure the resistance according the value(s) in the table below.

        Standard Resistance

        Tester Connection

        Condition

        Specified Condition

        1 - 2

        25°C (77°F)

        13.4 Ω

        If the result is not as specified, replace the mirror sub-assembly RH.