TIRE PRESSURE WARNING SYSTEM, Diagnostic DTC:C2176/76

DTC Code DTC Name
C2176/76 Receiver Error

DESCRIPTION

The signals are transmitted to the tire pressure warning ECU and receiver in the vehicle as radio waves.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

C2176/76

Receiver Error

Malfunction in the tire pressure warning ECU and receiver internal circuit

Tire pressure warning ECU and receiver

CAUTION / NOTICE / HINT

Note:

  • When replacing the tire pressure warning ECU and receiver, read the transmitter IDs stored in the old ECU using the GTS and write them down before removal.

  • It is necessary to perform initialization (Click hereClick here) after registration (Click here) of the transmitter IDs into the tire pressure warning ECU and receiver if the ECU has been replaced.

PROCEDURE

  1. CHECK DTC OUTPUT (C2176/76)

    1. Clear the DTCs.

      Click here

      Chassis > Tire Pressure Monitor > Clear DTCs

    2. Turn the power switch off.

    3. Turn the power switch on (IG).

    4. Check for DTCs.

      Click here

      Chassis > Tire Pressure Monitor > Trouble Codes

      OK

      DTC C2176/76 is not output.

      Result

      Proceed to

      OK

      NG
    OK

    USE SIMULATION METHOD TO CHECK

    Click hereClick hereClick here

    NG

    REPLACE TIRE PRESSURE WARNING ECU AND RECEIVER

    Click here