NAVIGATION ANTENNA INSTALLATION


  1. INSTALL NO. 1 NAVIGATION ANTENNA CORD SUB-ASSEMBLY


    1. Attach the clamp to install the No. 1 navigation antenna cord sub-assembly, and then connect the connector.

  2. INSTALL NAVIGATION ANTENNA ASSEMBLY


    1. Install the navigation antenna assembly with the 2 screws.

    2. Connect the connector and attach the clamp.

  3. INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY

    Click here

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.