HEADLIGHT DIMMER SWITCH(w/ Side Marker Light) INSPECTION

PROCEDURE

  1. INSPECT HEADLIGHT DIMMER SWITCH ASSEMBLY

    1. E269070C01

      *a

      Component without harness connected

      (Headlight Dimmer Switch Assembly)

      Inspect the light control switch.

      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance

        Tester Connection

        Switch Condition

        Specified Condition

        20 (A) - 15 (EL)

        Light control switch off

        10 kΩ or higher

        19 (H) - 15 (EL)

        18 (T) - 15 (EL)

        20 (A) - 15 (EL)

        Light control switch AUTO position

        Below 1 Ω

        18 (T) - 15 (EL)

        Light control switch tail position

        Below 1 Ω

        18 (T) - 15 (EL)

        Light control switch head position

        Below 1 Ω

        19 (H) - 15 (EL)

        If the result is not as specified, replace the headlight dimmer switch assembly.

    2. E269070C03

      *a

      Component without harness connected

      (Headlight Dimmer Switch Assembly)

      Inspect the headlight dimmer switch.

      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance

        Tester Connection

        Switch Condition

        Specified Condition

        17 (HF) - 15 (EL)

        Headlight dimmer switch flash position

        Below 1 Ω

        14 (HU) - 15 (EL)

        14 (HU) - 15 (EL)

        Headlight dimmer switch high position

        Below 1 Ω

        If the result is not as specified, replace the headlight dimmer switch assembly.

    3. E269070C05

      *a

      Component without harness connected

      (Headlight Dimmer Switch Assembly)

      Inspect the turn signal switch.

      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance

        Tester Connection

        Switch Condition

        Specified Condition

        12 (TR) - 15 (EL)

        Turn signal switch right turn position

        Below 1 Ω

        12 (TR) - 15 (EL)

        Turn signal switch neutral position

        10 kΩ or higher

        11 (TL) - 15 (EL)

        11 (TL) - 15 (EL)

        Turn signal switch left turn position

        Below 1 Ω

        If the result is not as specified, replace the headlight dimmer switch assembly.

    4. E269070C09

      *a

      Component without harness connected

      (Headlight Dimmer Switch Assembly)

      Inspect the fog light switch (w/ Fog Light).

      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance

        Tester Connection

        Switch Condition

        Specified Condition

        9 (BFG) - 8 (LFG)

        Front fog light switch off

        10 kΩ or higher

        9 (BFG) - 8 (LFG)

        Front fog light switch on

        Below 1 Ω

        If the result is not as specified, replace the headlight dimmer switch assembly.