IGNITION SWITCH INSTALLATION

PROCEDURE

  1. INSTALL IGNITION SWITCH ASSEMBLY

    1. A208848

      Install the ignition switch with the 2 screws.

    2. A208847

      Connect the ignition switch connector.

    3. A208846

      for CVT:

      Attach the claw to connect the key interlock solenoid wire harness connector to the ignition switch connector.

  2. INSTALL LOWER STEERING COLUMN COVER

    1. A208849

      Attach the 4 claws to install the lower steering column cover.

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).