HEATER BLOWER MOTOR RELAY INSTALLATION

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. INSTALL NO. 1 HEATER RELAY


    1. Install the No. 1 heater relay.

    2. Attach the clamp to install the driver side junction block.

    3. Install the 2 nuts.

  2. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY

    Click here

  3. INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY

    Click here

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.