TURN SIGNAL FLASHER ASSEMBLY INSTALLATION

PROCEDURE

1. INSTALL TURN SIGNAL FLASHER ASSEMBLY

   1. Install the turn signal flasher with the nut.

   2. Connect the connector.

2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY

   Click hereClick hereClick here

3. INSTALL INSTRUMENT PANEL FINISH PANEL END LH

   Click hereClick here

4. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

   Click hereClick here

5. INSTALL COWL SIDE TRIM BOARD LH

   Click hereClick hereClick here

6. INSTALL DOOR SCUFF PLATE ASSEMBLY LH

   Click hereClick hereClick here