PATTERN SELECT SWITCH INSPECTION

PROCEDURE


  1. INSPECT PATTERN SELECT SWITCH ASSEMBLY


    1. A004K66E01
      Text in Illustration
      *a

      Component without harness connected

      (Pattern Select Switch Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      6 - 8 Pattern select (SNOW) switch on Below 1 Ω
      Pattern select (SNOW) switch off 10 kΩ or higher
      4 - 8 Pattern select (SPORT) switch on Below 1 Ω
      Pattern select (SPORT) switch off 10 kΩ or higher

      If the result is not as specified, replace the pattern select switch assembly.