RADIATOR REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during radiator assembly removal/installation are shown below.

Necessary Procedures After Parts Removed/Installed/Replaced
Replaced Part or Performed Procedure Necessary Procedure Effect/Inoperative Function when Necessary Procedure not Performed Link
Headlight ECU sub-assembly LH

  • Synchronize the vehicle information

  • Perform headlight ECU sub-assembly LH initialization

 Lighting System (EXT) (w/ Automatic Headlight Beam Level Control System)

Click here

Front bumper assembly (w/ Panoramic View Monitor System) Front television camera view adjustment Panoramic View Monitor System

Click here

PROCEDURE


  1. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH

    Click here

  2. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH

    Click here

  3. REMOVE NO. 1 ENGINE UNDER COVER

    Click here

  4. REMOVE NO. 2 ENGINE UNDER COVER ASSEMBLY

    Click here

  5. DRAIN ENGINE COOLANT

    Click here

  6. REMOVE HEADLIGHT ASSEMBLY

    for LED Type Turn Signal Light: Click here

    for Bulb Type Turn Signal Light: Click here

  7. REMOVE THERMISTOR ASSEMBLY

    Click here

  8. REMOVE FRONT BUMPER ENERGY ABSORBER

    Click here

  9. REMOVE FRONT BUMPER REINFORCEMENT

    Click here

  10. REMOVE HOOD LOCK ASSEMBLY

    Click here

  11. REMOVE INLET AIR CLEANER ASSEMBLY

    Click here

  12. REMOVE UPPER RADIATOR MOUNTING BRACKET


    1. B0089F4

      Disconnect the 2 horn connectors.

    2. B00854L

      Remove the 2 bolts, 2 nuts and 2 upper radiator mounting brackets.

  13. REMOVE NO. 1 RADIATOR AIR GUIDE LH


    1. B00888DC01
      *1 No. 1 Radiator Air Guide LH
      *2 Front Radiator Side Air Guide Plate LH

      Remove the clip and disengage the claw.

    2. Disengage the guide to remove the No. 1 radiator air guide LH with the front radiator side air guide plate LH.

  14. REMOVE NO. 1 RADIATOR AIR GUIDE RH


    1. B00843K

      Remove the clip and disengage the claw.

    2. Disengage the guide to remove the No. 1 radiator air guide RH.

  15. REMOVE UPPER RADIATOR SUPPORT SUB-ASSEMBLY


    1. B0087BC

      Disengage the clamp to disconnect the hood lock control cable assembly from the upper radiator support sub-assembly.

    2. B0083MJ

      Remove the 4 bolts and upper radiator support sub-assembly.

  16. DISCONNECT NO. 5 WATER BY-PASS HOSE


    1. B0087TK

      Slide the clip and disconnect the No. 5 water by-pass hose from the radiator assembly.

  17. DISCONNECT NO. 6 WATER BY-PASS HOSE


    1. B0084C8

      Disconnect the No. 6 water by-pass hose from the radiator assembly.

  18. DISCONNECT NO. 1 RADIATOR HOSE


    1. B0086B7

      Disengage the clamp and disconnect the No. 1 radiator hose from the fan with motor assembly.

    2. Slide the clip and disconnect the No. 1 radiator hose from the radiator assembly.

  19. DISCONNECT NO. 2 RADIATOR HOSE


    1. B0083BA

      Slide the clip and disconnect the No. 2 radiator hose from the radiator assembly.

  20. REMOVE RADIATOR ASSEMBLY


    1. B0083JI

      Disengage the 2 claws.

    2. Disengage the 2 guides to separate the cooler condenser assembly from the radiator assembly.

      Note

      Make sure not to damage the cooler condenser assembly when separating the cooler condenser assembly.

    3. B0089LEC01
      *a Lock Lever

      Disengage the claw and raise the lock lever to disconnect the cooling fan motor connector as shown in the illustration.

      Note

      After disconnecting the cooling fan motor connector, make sure that dirt, water or other foreign matter does not contact the connecting parts of the cooling fan motor connector.

    4. Disengage the wire harness clamp.

    5. Remove the radiator assembly with the fan with motor assembly from the vehicle body.

      Note

      Do not apply excessive force to the cooler condenser assembly or pipe when removing the radiator assembly with the fan with motor assembly.

    6. B0088I3

      Disengage the 2 claws.

    7. Disengage the 2 guides to remove the fan with motor assembly from the radiator assembly.

      Note

      Do not damage the radiator assembly when removing the fan with motor assembly.

  21. REMOVE RADIATOR SUPPORT CUSHION


    1. Remove the 2 radiator support cushions from the radiator assembly.

  22. REMOVE LOWER RADIATOR SUPPORT


    1. Remove the 2 lower radiator supports from the radiator assembly.