REAR SEAT OUTER BELT ASSEMBLY(for Hatchback) ON-VEHICLE INSPECTION

CAUTION / NOTICE / HINT

CAUTION:

Be sure to follow the correct removal and installation procedures of the rear seat 3 point type outer belt assembly.

PROCEDURE

  1. INSPECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY (for Vehicle not Involved in Collision)

    1. Visually check for defects on the rear seat 3 point type outer belt assembly installed on the vehicle.

      1. The defects to be checked are as follows:

        • Cuts on the rear seat 3 point type outer belt assembly

        • Small cracks on the rear seat 3 point type outer belt assembly

        • Significant discoloration on the rear seat 3 point type outer belt assembly

        OK

        No defects are found.

        Tip:

        If any of the defects are found, replace the rear seat 3 point type outer belt assembly with a new one.

  2. INSPECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY (for Vehicle Involved in Collision)

    1. Visually check for defects on the rear seat 3 point type outer belt assembly removed from the vehicle.

      1. The defects to be checked are as follows:

        • Cuts on the rear seat 3 point type outer belt assembly

        • Small cracks on the rear seat 3 point type outer belt assembly

        • Significant discoloration on the rear seat 3 point type outer belt assembly

        • Cracks or other damage on the connector

        OK

        No defects are found.

        Tip:

        If any of the defects are found, replace the rear seat 3 point type outer belt assembly with a new one.