HAZARD WARNING SWITCH INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL HAZARD WARNING SIGNAL SWITCH ASSEMBLY


    1. B006BA4C01
      B006DHE Install in this Direction

      Attach the claw and install the hazard warning signal switch assembly.

    2. B006F1J

      Connect the connector.

  2. INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH ASSEMBLY

    Click here

  3. INSTALL INSTRUMENT PANEL SAFETY PAD INSERT SUB-ASSEMBLY

    Click here

  4. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY

    Click here

  5. INSTALL NO. 2 CONSOLE UPPER PANEL GARNISH

    Click here

  6. INSTALL INSTRUMENT SIDE PANEL RH

    Click here

  7. INSTALL LOWER NO. 1 INSTRUMENT PANEL PAD SUB-ASSEMBLY

    Click here

  8. INSTALL COWL SIDE TRIM BOARD LH

    Click here

  9. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  10. INSTALL INSTRUMENT SIDE PANEL LH

    Click here

  11. INSTALL FRONT DOOR SCUFF PLATE LH

    Click here