BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS SERVICE DATA

Deceleration Sensor (for 4WD and Pre-Runner without VSC)
Tester Connection Condition Specified Condition
1 (GL1) - Battery negative (-) lead Horizontal Approx. 2.25 V
1 (GL1) - Battery negative (-) lead Sensor is tilted forward Approx. 0.45 to 2.25 V
1 (GL1) - Battery negative (-) lead Sensor is tilted rearward Approx. 2.25 to 4.05 V
VSC OFF Switch
Tester Connection Switch Condition Specified Condition
3 - 6 Pressed Below 1 Ω
Not pressed 10 kΩ or higher
Downhill Assist Control Switch
Tester Connection Switch Condition Specified Condition
1 - 4 Pressed Below 1 Ω
Not pressed 10 kΩ or higher
Stop Light Control Relay (STOP LP)
Tester Connection Condition Specified Condition
3 - 4 Battery positive (+) voltage not applied to terminal 1 and battery negative (-) voltage applied to terminal 2 Below 1 Ω
Battery positive (+) voltage applied to terminal 1 and battery negative (-) voltage to terminal 2 10 kΩ or higher
3 - 5 Battery positive (+) voltage not applied to terminal 1 and battery negative (-) voltage applied to terminal 2 10 kΩ or higher
Battery positive (+) voltage applied to terminal 1 and battery negative (-) voltage to terminal 2 Below 1 Ω