LIGHTING SYSTEM CUSTOMIZE PARAMETERS
PROCEDURE
CUSTOMIZE LIGHTING SYSTEM (INT)
Tip:The following items can be customized.
Note:When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON.
Turn the intelligent tester on.
Enter the following menus: Utility / Customize.
Select the setting by referring to the table below.
Table 1. Illuminated Entry Display
Default
Content
Setting
Lighting Time
15s
A function that changes the duration that the lights remain on after closing the doors (the lights quickly fade out when the ignition switch is turned to ON).
7.5s/15s/30s
I/L when ACC OFF
ON
A function that turns on the lights when the ignition switch is turned from ON or ACC to off (the room light turns on when the map light switch is set to DOOR).
ON/OFF
I/L ON W/Door Key Unlock
ON
A function that turns on the room light when the door is unlocked with the door key cylinder (the room light turns on when the map light switch is set to DOOR).
ON/OFF
Room Light when Aprchd*1
ON
A function that turns on the room light when the key is brought within the vehicle exterior detection area (the room light turns on when the map light switch is set to DOOR).
ON/OFF
Inside Foot Light
ON
A function that enables or disables the operation of the No. 1 interior illumination light assemblies and console box illumination light assembly*3.
ON/OFF
Light Control
ON
A function that illuminates the No. 1 interior illumination light assemblies and console box illumination light assembly*3 when the ignition switch is ON and the shift lever is not in P*2.
ON/OFF
*1: w/ Entry and Start System
*2: except Manual Transaxle
*3: w/ Console Box Lid