WASHER NOZZLE(for Rear Side) ON-VEHICLE INSPECTION

PROCEDURE

  1. INSPECT REAR WASHER NOZZLE SUB-ASSEMBLY

    1. With the engine running, check that the center stream of washer fluid sprays on the windshield within the hatched area shown in the illustration.

      Standard

      Washer fluid hits the windshield in the area shown in the illustration.

      E200709N02

      Standard

      Area

      Specified Condition

      Area

      Specified Condition

      A

      42.7 mm (1.68 in.)

      B

      21.5 mm (0.847 in.)

      C

      65.5 mm (2.58 in.)

      D

      426.6 mm (16.8 in.)

      E

      505.5 mm (19.9 in.)

      F

      140.5 mm (5.53 in.)

      G

      3.6 mm (0.142 in.)

      H

      412.8 mm (16.3 in.)

      I

      494.9 mm (19.5 in.)

      J

      50.4 mm (1.98 in.)
      Tip:

      If the result is not as specified, replace the malfunctioning rear washer nozzle.