FUEL LID LOCK CONTROL CABLE ASSEMBLY(for Sedan LHD) REMOVAL

PROCEDURE

  1. REMOVE FRONT SEAT ASSEMBLY LH

    Click here

  2. REMOVE REAR SEATBACK ASSEMBLY LH

    Click here

  3. REMOVE FRONT DOOR SCUFF PLATE LH

    Click hereClick hereClick here

  4. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP LH

    Click here

  5. REMOVE REAR DOOR SCUFF PLATE LH

    Click hereClick hereClick here

  6. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP LH

    Click here

  7. REMOVE LAP BELT OUTER ANCHOR COVER (for LH Side)

    Click here

  8. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY LH

    Click here

  9. REMOVE CENTER PILLAR LOWER GARNISH LH

    Click hereClick hereClick here

  10. REMOVE REAR SEATBACK HINGE SUB-ASSEMBLY

    Click hereClick hereClick here

  11. REMOVE REAR SEAT SIDE GARNISH LH

    Click hereClick hereClick here

  12. REMOVE REAR FLOOR FINISH PLATE

    Click here

  13. REMOVE LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH

    1. B351190

      Remove the 4 clips and remove the luggage compartment trim cover assembly LH.

  14. REMOVE FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY

    Click here

  15. REMOVE FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY

    1. B351200

      Disengage the clamp.

    2. Turn back the floor carpet so that the fuel lid lock control cable sub-assembly can be removed.

    3. B351191

      Disengage the 2 claws and disconnect the fuel lid lock control cable sub-assembly.

    4. Disengage the 6 clamps and remove the fuel lid lock control cable sub-assembly.

      B351192