PARKING BRAKE LEVER INSTALLATION

PROCEDURE

  1. INSTALL PARKING BRAKE LEVER SUB-ASSEMBLY

    1. Install the parking brake lever sub-assembly with the 2 bolts.

      14.5 N*m

      148 kgf*cm

      11 ft.*lbf

    2. Connect the parking brake switch connector.

    3. Temporarily install the lock nut.

      Tip:

      After adjusting parking brake lever travel, tighten the lock nut.

  2. CONNECT NO. 3 PARKING BRAKE CABLE ASSEMBLY

    1. C279558C01

      *1

      No. 3 Parking Brake Cable Assembly

      *2

      No. 2 Parking Brake Cable Assembly

      Connect the No. 3 parking brake cable assembly to the parking brake lever sub-assembly as shown in the illustration.

  3. CONNECT NO. 2 PARKING BRAKE CABLE ASSEMBLY

    Tip:

    Perform the same procedure as for the No. 3 parking brake cable assembly.

  4. ADJUST PARKING BRAKE LEVER TRAVEL

    Click hereClick here

  5. INSPECT BRAKE WARNING LIGHT

    Click hereClick here

  6. INSTALL REAR CONSOLE BOX ASSEMBLY

    for Hatchback, Wagon:Click hereClick here

    for Sedan:Click hereClick here