DOOR CONTROL SWITCH INSPECTION


  1. INSPECT POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (W/ POWER WINDOW)


    1. B007REWE01

      Disconnect the power window master switch assembly.

    2. Measure the resistance when the switch is operated according to the value(s) in the table below.

      Standard resistance
      Tester Connection Door Lock Condition Specified Condition
      1 - 8 ON (Door lock set to UNLOCK) Below 1 Ω
      1 - 5 OFF (Door Lock set to LOCK) Below 1 Ω

  2. INSPECT DOOR CONTROL SWITCH ASSEMBLY (W/O POWER WINDOW)


    1. B007VGXE02

      Disconnect the door control switch assembly.

    2. Measure the resistance when the switch is operated according to the value(s) in the table below.

      Standard resistance
      Tester Connection Door Lock Condition Specified Condition
      5 - 6 ON (Door lock set to UNLOCK) Below 1 Ω
      3 - 6 OFF (Door Lock set to LOCK) Below 1 Ω