HARD DISK DRIVE INSTALLATION

PROCEDURE


  1. PRECAUTION

    Note

    When installing the hard disk drive, eliminate static electricity by touching the vehicle body to prevent components from being damaged.

  2. INSTALL HARD DISK DRIVE


    1. A005BQE

      Insert the hard disk drive in the direction shown by the arrow in the illustration to install it.

      Note

      To reduce the chance of bending the pins, make sure to keep the hard disk drive straight when inserting it.

    2. Engage the 2 guides to temporarily install the cover.

    3. Install the cover with the 2 screws.

  3. INSTALL NO. 2 RADIO RECEIVER BRACKET

    Tech Tips

    Use the same procedure as for the No. 1 receiver radio bracket Click here.

  4. INSTALL NAVIGATION RECEIVER ASSEMBLY WITH BRACKET

    Click here

  5. INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

  6. INSTALL INSTRUMENT PANEL BOX ASSEMBLY

    Click here

  7. INSTALL INTEGRATION CONTROL AND PANEL

    Click here

  8. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  9. INSTALL DECK FLOOR BOX RH

    Click here

  10. INSTALL REAR DECK FLOOR BOX

    Click here

  11. INSTALL NO. 1 DECK BOARD

    Click here

  12. INSTALL NO. 2 DECK BOARD

    Click here

  13. INSTALL DECK BOARD ASSEMBLY

    Click here

  14. INSPECT HARD DISK DRIVE

    Click here