ELECTRIC PARKING BRAKE ECU INSTALLATION

PROCEDURE

1. INSTALL FUEL PUMP CONTROL ECU

   
   

   1. for 8GR-FKS:

      Click here

   2. for V35A-FTS:

      Click here

2. INSTALL PARKING BRAKE ECU ASSEMBLY

   
   

   1. 

      Connect the 2 connectors to the fuel pump control ECU.

   2. 

      Connect the 2 connectors to the electric parking brake ECU.

   3. Atach the clamp.

   4. 

      Install the electric parking brake ECU with the 2 nuts.

      Torque:

      8.5 N*m  { 87 kgf*cm, 75 in.*lbf }

3. INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH

   Click here

4. INSTALL REAR FLOOR FINISH PLATE

   Click here

5. INSTALL ROPE HOOK ASSEMBLY

   Click here

6. INSTALL REAR LUGGAGE COMPARTMENT TRIM COVER

   Click here

7. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

   Click here

8. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER (w/ Rear Air Conditioning System)

   Click here

9. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER (w/o Rear Air Conditioning System)

   Tech Tips

   Use the same procedure described for the front luggage compartment trim cover (w/ Rear Air Conditioning System).

10. INSTALL INNER LOWER LUGGAGE COMPARTMENT TRIM COVER

    Click here

11. INSTALL TOOL BOX

    Click here

12. INSTALL LUGGAGE COMPARTMENT TRIM BOX (w/ Luggage Compartment Trim Box)

    Click here

13. INSTALL LUGGAGE COMPARTMENT TRIM COVER LH

    Click here

14. INSTALL LUGGAGE COMPARTMENT TRIM COVER RH

    Click here

15. INSTALL LUGGAGE COMPARTMENT FLOOR MAT

    Click here

16. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Click here

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

17. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY

    Click here

18. PERFORM INITIALIZATION

    Click here