HEADLIGHT CLEANER SWITCH INSTALLATION

PROCEDURE

1. INSTALL HEADLIGHT CLEANER SWITCH ASSEMBLY

   1. Attach the 2 claws to install the switch.

2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY

   Click hereClick here

3. INSTALL INSTRUMENT PANEL FINISH PANEL END LH

   Click here

4. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

   Click here

5. INSTALL COWL SIDE TRIM BOARD LH

   Click hereClick here

6. INSTALL DOOR SCUFF PLATE ASSEMBLY LH

   Click hereClick here

7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).