AMBIENT LIGHT(for Front Door) INSPECTION

PROCEDURE


  1. INSPECT FRONT DOOR TRIM BOARD SUBASSEMBLY LH (FRONT DOOR AMBIENT ILLUMINATION LIGHT LH)


    1. A01R90BC01
      *a

      Component without harness connected

      (Front Door Trim Board Sub-assembly LH)

      Apply battery voltage to the connector and check that the front door ambient illumination light LH comes on.

      OK
      Measurement Condition Condition Specified Condition

      Battery positive (+) → 1 (+)

      Battery negative (-) → 2 (-)

      		 Always Front door ambient illumination light LH comes on

      If the result is not as specified, replace the front door trim board sub-assembly LH.

  2. INSPECT FRONT DOOR TRIM BOARD SUBASSEMBLY RH (FRONT DOOR AMBIENT ILLUMINATION LIGHT RH)


    1. A01R90BC01
      *a

      Component without harness connected

      (Front Door Trim Board Sub-assembly RH)

      Apply battery voltage to the connector and check that the front door ambient illumination light RH comes on.

      OK
      Measurement Condition Condition Specified Condition

      Battery positive (+) → 1 (+)

      Battery negative (-) → 2 (-)

      		 Always Front door ambient illumination light RH comes on

      If the result is not as specified, replace the front door trim board sub-assembly RH.