WASHER NOZZLE(for Wagon Rear Side) ON-VEHICLE INSPECTION

PROCEDURE

  1. INSPECT REAR WASHER NOZZLE

    1. Operate the rear washer nozzle and check the position that the washer fluid hits the back door glass.

      Standard

      Washer fluid hits the back door glass in the area shown in the illustration.

      E278212C01

      *a

      Vehicle Center Line

      *b

      Edge of Back Door Glass
      V100155

      Measurement

      -

      -

      Standard Measurement

      Area

      Measurement

      Area

      Measurement

      A

      35.9 mm (1.41 in.)

      B

      9.3 mm (0.366 in.)

      C

      34.8 mm (1.37 in.)

      D

      7.1 mm (0.28 in.)

      E

      3.5 mm (0.138 in.)

      F

      4.9 mm (0.193 in.)

      G

      81.1 mm (3.19 in.)

      H

      110.1 mm (4.33 in.)
      Tip:

      If the result is not as specified, replace the rear washer nozzle.