BACK DOOR CLOSER ECU REMOVAL

CAUTION / NOTICE / HINT

Note:

When replacing the multiplex network door ECU, the back door automatic open stop position (memory stopped position) is memorized, so be sure to make a note of the automatic open stop position.

PROCEDURE

  1. REMOVE BACK DOOR CENTER GARNISH

    Click here

  2. REMOVE BACK DOOR SIDE GARNISH LH

    Click here

  3. REMOVE BACK DOOR SIDE GARNISH RH

    Tip:

    Use the same procedure described for the LH side.

  4. REMOVE BACK DOOR TRIM BOARD ASSEMBLY

    Click here

  5. REMOVE MULTIPLEX NETWORK DOOR ECU

    1. B421529C01
      V100135

      Bolt
      V100136

      Connector

      Disconnect the 2 connectors.

    2. Remove the 2 bolts.

    3. Detach the clip and guide and remove the multiplex network door ECU.