REVOLUTION SENSOR INSTALLATION

PROCEDURE

  1. INSTALL TRANSMISSION REVOLUTION SENSOR (NT)

    1. Apply Toyota Genuine CVT fluid FE to a new O-ring.

    2. Install the O-ring to the transmission revolution sensor (NT).

    3. Install the transmission revolution sensor (NT) to the continuously variable transaxle assembly with the bolt.

      5.4 N*m

      55 kgf*cm

      48 in.*lbf

    4. Connect the transmission revolution sensor (NT) connector.

  2. INSTALL TRANSMISSION REVOLUTION SENSOR (NOUT)

    1. Apply Toyota Genuine CVT fluid FE to a new O-ring.

    2. Install the O-ring to the transmission revolution sensor (NOUT).

    3. Install the transmission revolution sensor (NOUT) to the continuously variable transaxle assembly with the bolt.

      5.4 N*m

      55 kgf*cm

      48 in.*lbf

    4. Connect the transmission revolution sensor (NOUT) connector.

  3. INSTALL TRANSMISSION REVOLUTION SENSOR (NIN)

    1. Apply Toyota Genuine CVT fluid FE to a new O-ring.

    2. Install the O-ring to the transmission revolution sensor (NIN).

    3. Install the transmission revolution sensor (NIN) to the continuously variable transaxle assembly with the bolt.

      5.4 N*m

      55 kgf*cm

      48 in.*lbf

    4. Connect the transmission revolution sensor (NIN) connector.

  4. INSTALL REAR ENGINE UNDER COVER LH (for 1ZR-FAE)

    Click here

  5. INSTALL REAR ENGINE UNDER COVER LH (for 1ZR-FE)

    Click here

  6. INSTALL REAR ENGINE UNDER COVER LH (for 2ZR-FE)

    Click here

  7. INSTALL NO. 1 ENGINE UNDER COVER (for Half Cover Type)

  8. INSTALL NO. 1 ENGINE UNDER COVER (for Full Cover Type)

    Click here

  9. INSTALL NO. 1 ENGINE UNDER COVER (for Metal Type)

  10. CHECK DATA LIST

    Click here