FRONT BUMPER INSTALLATION

PROCEDURE

  1. INSTALL FRONT BUMPER ASSEMBLY

    1. B512178

      Engage the 2 claws as shown in the illustration.

    2. Temporarily install the front bumper assembly with the 7 clips.

    3. Pull back the side of the front bumper assembly, connect the 2 connectors.

      Note:

      Do not apply excessive force when pulling back the front bumper assembly.

    4. B512174

      Engage the 4 claws as shown in the illustration.

      Tip:

      Use the same procedure for the RH side and LH side.

    5. Install the 7 screws.

    6. Pull back the edge of the front fender liner LH and install the clip.

      Note:

      Do not apply excessive force when pulling back the front fender liner LH.

      Tip:

      Use the same procedure for the RH side and LH side.

    7. Install the front bumper assembly with the 4 clips.

  2. ADJUST FOG LIGHT ASSEMBLY (w/ Fog Light)

    Click here