| DTC Code | DTC Name |
|---|---|
| P175009 | Brake ECU Malfunction |
DESCRIPTION
This DTC is stored if the ECM receives a malfunction signal from the brake actuator assembly (skid control ECU).
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Memory | Note |
|---|---|---|---|---|---|---|
| P175009 | Brake ECU Malfunction | The ECM receives a malfunction signal from the skid control ECU (brake actuator assembly) for 3 seconds (1 trip detection logic). | Vehicle stability control system | Comes on (Euro-OBD) Does not come on (Except Euro-OBD) |
DTC stored | SAE Code: P1750 |
CAUTION / NOTICE / HINT
Tech Tips
After performing repair, clear the DTCs and perform the following procedure to check that DTCs are not output.
Drive the vehicle at 20 km/h (12 mph) or more for 9 seconds or more.
Check for DTCs again.
PROCEDURE
CHECK DTC OUTPUT (BRAKE CONTROL SYSTEM)
Check for brake control system DTCs.
| Result | ||||||
|---|---|---|---|---|---|---|
|
| A |
|
CHECK FOR INTERMITTENT PROBLEMS Click here |
| B |
|
GO TO VEHICLE STABILITY CONTROL SYSTEM Click here |