FUEL LID LOCK CONTROL CABLE ASSEMBLY(for Sedan LHD) INSTALLATION

PROCEDURE

1. INSTALL FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY

   1. Engage the 6 clamps to install the fuel lid lock control cable sub-assembly.

   2. Engage the 2 claws to connect the fuel lid lock control cable sub-assembly.

   3. Return the floor carpet to the original position.

   4. Engage the clamp.

2. INSTALL FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY

   Click here

3. INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH

   1. Install the luggage compartment trim cover assembly LH with the 4 clips.

4. INSTALL REAR FLOOR FINISH PLATE

   Click here

5. INSTALL REAR SEAT SIDE GARNISH LH

   Click hereClick hereClick here

6. INSTALL REAR SEATBACK HINGE SUB-ASSEMBLY

   Click hereClick hereClick here

7. INSTALL CENTER PILLAR LOWER GARNISH LH

   Click hereClick hereClick here

8. CONNECT FRONT SEAT OUTER BELT ASSEMBLY LH

   Click hereClick here

9. INSTALL LAP BELT OUTER ANCHOR COVER (for LH Side)

   Click hereClick here

10. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

    Click hereClick hereClick here

11. INSTALL REAR DOOR SCUFF PLATE LH

    Click hereClick hereClick here

12. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH

    Click hereClick hereClick here

13. INSTALL FRONT DOOR SCUFF PLATE LH

    Click hereClick hereClick here

14. INSTALL REAR SEATBACK ASSEMBLY LH

    Click here

15. INSTALL FRONT SEAT ASSEMBLY LH

    Click here