GENERATOR REASSEMBLY

PROCEDURE

1. INSTALL GENERATOR REGULATOR ASSEMBLY

   1. 

      Push in the brushes and slide the brush cap to hold the brushes in place.

      Table 1. Text in Illustration

      *1	Brush
      *2	Brush Cap

   2. 

      Install the generator regulator assembly with the 3 bolts.

      4.3 N*m

      43 kgf*cm

      38 in.*lbf

   3. Push in the brush cap.

      Table 2. Text in Illustration

      *1

      Brush Cap

      Tip:

      By pushing in the brush cap after installing the generator regulator assembly, the brushes pop out and contact the slip rings.

   4. Install the generator rear end cover with the bolt and nut.

      3.9 N*m

      40 kgf*cm

      35 in.*lbf