COWL TOP TO APRON BRACE ASSEMBLY REPLACEMENT

A004L6D

  1. REMOVAL

    Symbol meaning
    A004L9C Remove Weld Points
    A004L2L Remove Weld Points
    A004L0A Cut with Disk Sander etc.

      REMOVAL POINT

    1. *1: Bolts.

    2. After removing the front fender apron patch No.4 and front fender apron patch, remove the cowl top side panel sub-assembly.

    A004L8XE02

  2. INSTALLATION

    Symbol meaning
    A004L4Z Plug Weld
    A004L6I Plug Weld
    A004L1P Fillet Weld

      INSTALLATION POINT

    1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

    2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimension diagram)

    3. *1: Bolts.

    4. After welding the cowl top side panel sub-assembly to the vehicle side, install the front fender apron patch No.4 and front fender apron patch.

    5. After welding, apply body sealer to the corresponding parts. (See the painting / coating)

    6. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A004L8CE01