| DTC Code | DTC Name |
|---|---|
| U0073 | Control Module Communication Bus Off |
| U0100 | Lost Communication with ECM / PCM "A" |
| U0126 | Lost Communication with Steering Angle Sensor Module |
| U0129 | Lost Communication with Brake System Control Module |
| U0131 | Lost Communication with Power Steering Control Module |
| U0140 | Lost Communication with Main Body ECU |
| U0293 | Lost Communication with HV ECU |
DESCRIPTION
These DTCs are stored if there is a malfunction in the CAN communication system connected to the parking assist ECU.
Tech Tips
If CAN communication system DTCs are stored, they may also be stored in other systems.
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| U0073 | Control module communication bus off | CAN communication system |
| U0100 | Lost Communication with ECM | |
| U0126 | Lost communication with spiral cable with sensor sub-assembly | |
| U0129 | Lost communication with brake actuator (skid control ECU) | |
| U0131 | Lost communication with power steering ECU assembly | |
| U0140 | Lost communication with main body ECU (multiplex network body ECU) | |
| U0293 | Lost communication with power management control ECU |
PROCEDURE
CHECK DTC OUTPUT
Clear the DTCs Click here.
Check for DTCs Click here.
| Result | ||||||
|---|---|---|---|---|---|---|
|
Tech Tips
If CAN communication system DTCs are stored, they may also be stored in other systems.
If the CAN communication system has been inspected and repaired in other systems, the DTCs will not be output when rechecking for DTCs.
If these DTCs are output frequently, duplicate the conditions that cause the problem symptoms and perform the inspection again, even though the DTC was not output when rechecking for DTCs Click here.
| A |
|
GO TO CAN COMMUNICATION SYSTEM Click here |
| B |
|
USE SIMULATION METHOD TO CHECK Click here |