METER / GAUGE SYSTEM SYSTEM DESCRIPTION
METER GAUGE AND WARNING/INDICATOR
Table 1. Text in Illustration *1
SIL Indicator Light (UP/DOWN) (for Manual Transaxle)
Shift Position Indicator (for CVT)
*2
SIL Indicator Light (UP/DOWN) (for Manual Transaxle)
*3
Tachometer
*4
Speedometer
*5
Multi-information Display
Fuel Receiver Gauge
Clock
ODO/TRIP
Outside Temperature
Eco Driving Indicator Zone Display (for CVT)
*6
ODO/TRIP Switch
Table 2. Meter/Gauge Item
Details
Speedometer
Based on a signal received from the wheel speed sensors, the skid control ECU calculates the vehicle speed and transmits data to the combination meter (CAN).
Tachometer
The combination meter receives an engine speed signal from the ECM and the gauge needle operates (CAN).
ODO/TRIP meter
The combination meter receives a vehicle speed pulse integration signal from the skid control ECU and the ODO/TRIP meter display operates (CAN).
The ODO/TRIP meter display changes when the ODO/TRIP switch is operated.
Fuel receiver gauge
The combination meter receives fuel amount information measured by the fuel sender gauge and the gauge needle operates (Direct line).
Table 3. Warning/Indicator Item
Details
BEAM indicator light
Receives BEAM indicator light signals from the main body ECU (CAN).
Automatic high beam indicator light*13
Receives automatic high beam indicator signals from the main body ECU (CAN).
FRONT FOG indicator light*1
The indicator turns on when a FRONT FOG illumination command signal is received (CAN).
REAR FOG indicator light*2
The indicator turns on when a REAR FOG illumination command signal is received (CAN).
LEVELING indicator light*3
Receives leveling signals from the leveling ECU (Direct line).
SRS warning light
Receives malfunction signals from the center airbag sensor (CAN).
Front seat belt warning light
Receives driver seat belt signals (unfastened) from the main body ECU (CAN).
Receives passenger seat belt signals (unfastened) from the front seat inner belt assembly RH*8, LH*4 (Direct line).
Receives passenger seat signals from the separate type front seat cushion pad (occupant detection sensor) (Direct line).
Brake warning light
Comes on when the parking brake switch is on (CAN).
Comes on when the brake fluid level warning switch is on (Direct line).
Comes on to inform the driver that a malfunction in the EBD has occurred.
CHARGE warning light
Receives malfunction signals from the generator (CAN).
ABS warning light
Receives malfunction signals from the brake actuator assembly (CAN).
MIL
Receives malfunction signals from the ECM (Direct line).
FUEL warning light
Receives signals from the fuel sender gauge indicating low or no fuel (Direct line).
Engine coolant temperature COOL
Receives engine coolant temperature signals from the ECM (CAN).
Engine coolant temperature HOT
Receives engine coolant temperature signals from the ECM (CAN).
SLIP indicator light
Receives malfunction signals from the brake actuator assembly (CAN).
TAIL indicator light
The indicator turns on when a taillight illumination signal is received (CAN).
Turn signal indicator light (LH/RH)
Receives a turn signal from the FLASHER relay (Direct line).
EPS warning light
Receives power steering warning signals from the power steering ECU (CAN).
Master warning light
Receives warning signals from sensors and ECUs (Direct line and CAN).
SIL indicator light (UP/DOWN)*5
Receives a gear shift indicator signal from the ECM (CAN).
Eco driving indicator light*6
Receives an Ecology lamp indicator signal from the ECM (CAN (CAN No. 1 Bus)) and illuminates when the vehicle is being driven in eco-friendly.
SPORT indicator light*6
Receives a sport signal from the ECM (CAN).
Cruise indicator light*7
Receives a cruise control switch signal from the ECM (CAN).
Speed limiter indicator light*11
Receives a warning canceling switch signal from the ECM (CAN).
Cruise set indicator light*7
Receives a cruise control switch signal from the ECM (CAN).
VSC OFF indicator light
Receives a VSC OFF indicator signal from the brake actuator assembly (CAN).
Tire pressure warning light*9
Receives a tire pressure warning signal from the tire pressure warning ECU and receiver (Direct line).
Stop and start cancel indicator light*10
Receives a stop and start cancel indicator signal from the engine stop and start ECU (CAN).
Stop and start indicator light*10
Receives a stop and start indicator signal from the engine stop and start ECU (CAN).
Glow indicator*12
Receives a glow signal from the ECM (Direct line or CAN).
Diesel particulate filter warning light*12
Receives diesel particulate filter warning light signals from the ECM (CAN).
Lane departure alert indicator light*15
Receives a lane departure alert indicator signals from the pre-collision city camera.
PCS indicator light*14
Receives a PCS indicator signals from the forward recognition pre-collision city camera.
A/T P shift position indicator*6
Receives a P signal from the ECM (CAN).
A/T R shift position indicator*6
Receives an R signal from the ECM (CAN).
A/T N shift position indicator*6
Receives an N signal from the ECM (CAN).
A/T D shift position indicator*6
Receives a D signal from the ECM (CAN).
A/T M (1 to 7) shift position indicator*6
Receives a signal (1 to 7) from the ECM (CAN).
*1: w/ Front Fog Light
*2: w/ Rear Fog Light
*3: w/ HID Headlight System
*4: for RHD
*5: for Manual Transaxle
*6: for CVT
*7: w/ Cruise Control System
*8: for LHD
*9: w/ Tire Pressure Warning System
*10: w/ Stop and Start System
*11: w/ Speed Limiter System
*12: for 1WW
*13: w/ Automatic High Beam System
*14: w/ Pre-collision System
*15: w/ Lane Departure Alert System
MULTI-INFORMATION DISPLAY
Drive monitor
The information displayed changes in the following order each time the DISP switch is pressed.
