AIR CONDITIONING SYSTEM(for Manual Air Conditioning System) INITIALIZATION


  1. INITIALIZATION SERVO MOTOR


    1. Turn the ignition switch off.

    2. Connect the GTS to the DLC3.

    3. Turn the ignition switch ON.

    4. Press the A/C OFF switch.

    5. Turn the GTS on.

    6. Enter the following menus: Body Electrical / Air Conditioner / Utility / Servomotor Initialization.

    7. According to the GTS display, perform servo motor initialization.


      Body Electrical > Air Conditioner > Utility
      Tester Display
      Servomotor Initialization

    8. According to the GTS display, select the Exit switch to finish initialization.