RELAY ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT IGCT RELAY


    1. Inspect IGCT MAIN relay


      1. A005F0Y

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        3 - 5 Auxiliary battery voltage is not applied between terminals 1 and 2 10 kΩ or higher
        3 - 5 Auxiliary battery voltage is applied between terminals 1 and 2 Below 1 Ω

        If the result is not as specified, replace the relay.