FUEL SENDER GAUGE ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT FUEL SENDER GAUGE ASSEMBLY


    1. Check that the float moves smoothly between F and E.

    2. Measure the resistance according to the value(s) in the table below.

      A005ALJE01
      Text in Illustration
      *A Type A *B Type B
      *a

      Component without wire harness connected

      (Fuel Sender Gauge Assembly)

      		 - -
      Standard Resistance
      Tester Connection Float Level Type A Type B
      1 - 2 F 12.0 to 18.0 Ω 13.5 to 16.5 Ω
      Between F and E 12.0 to 415.0 Ω (Gradually changes) 13.5 to 414.5 Ω (Gradually changes)
      E 405.0 to 415.0 Ω 405.5 to 414.5 Ω

      If the value is not as specified, replace the fuel sender gauge assembly.