LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH INSTALLATION

PROCEDURE

  1. INSTALL LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH PROTECTOR

    1. Wipe off any tape adhesive residue with cleaner.

    2. Remove the release paper from a new luggage compartment door outside garnish protector.

      Tip:

      After removing the release paper, keep the exposed adhesive free from foreign matter.

    3. Install the new luggage compartment door outside garnish protector as shown in the illustration.

      B350734E01
      Table 1. Standard Measurement

      Dimension

      Measurement

      A

      4.5 to 5.5 mm (0.177 to 0.217 in.)

      B

      3.0 to 9.0 mm (0.118 to 0.354 in.)

  2. INSTALL LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH SUB-ASSEMBLY

    1. Install 5 new gaskets to the luggage compartment door outside garnish sub-assembly.

    2. Install a new clip to the luggage compartment door outside garnish sub-assembly.

    3. Engage the clip.

    4. Install the luggage compartment door outside garnish sub-assembly with the 3 nuts.

  3. INSTALL LUGGAGE COMPARTMENT DOOR OPENING SWITCH ASSEMBLY

    Click here

  4. INSTALL REAR LIGHT ASSEMBLY LH

    Click here

  5. INSTALL REAR LIGHT ASSEMBLY RH

    Tip:

    Use the same procedure as for the LH side.