ENGINE OIL TEMPERATURE SENSOR INSTALLATION

PROCEDURE


  1. INSTALL ENGINE OIL TEMPERATURE SENSOR


    1. Install a new gasket to the engine oil temperature sensor.

    2. B008LI2N01

      Using SST, install the engine oil temperature sensor to the oil pump relief valve housing assembly.

      SST
      09817-33191
      Torque:
      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

      Note

      If the engine oil temperature sensor has been struck or dropped, replace it.

    3. Connect the engine oil temperature sensor connector.

  2. CHECK ENGINE OIL LEVEL

    Click here

  3. INSPECT FOR ENGINE OIL LEAK

    Click here

  4. INSTALL REAR ENGINE UNDER COVER RH

    Click here

  5. INSTALL FRONT WHEEL RH

    Click here