AIR FUEL RATIO SENSOR(for Sensor 1) INSTALLATION

PROCEDURE

  1. INSTALL AIR FUEL RATIO SENSOR

    Tip:

    Perform "O2 Sensor Learning Value Reset" after replacing the air fuel ratio sensor.

    Click here

    1. A373168C01

      *a

      Torque Wrench Fulcrum Length

      Using SST, install the air fuel ratio sensor.

      09224-00011

      Specified tightening torque

      50 N*m

      510 kgf*cm

      37 ft.*lbf

      Note:

      Avoid physical shock to the air fuel ratio sensor.

      Tip:

      • Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.

        Click hereClick here

      • When using SST (fulcrum length of 30 mm (1.18 in.)) + torque wrench (fulcrum length of 255 mm (10.04 in.)): 44.7 N*m (456 kgf*cm, 33 ft.*lbf)

    2. A340622C02

      *1

      Air Fuel Ratio Sensor Connector

      *2

      Bracket

      *a

      1.5 mm (0.0591 in.) or less

      Lower the air fuel ratio sensor connector to the position shown in the illustration and connect the air fuel ratio sensor connector.

    3. Attach the 2 clamps.

  2. INSPECT FOR EXHAUST GAS LEAK

    Click here

  3. INSTALL NO. 1 ENGINE COVER

    Click hereClick here

  4. PERFORM INITIALIZATION

    1. Perform "O2 Sensor Learning Value Reset" after replacing the air fuel ratio sensor.

      Click here