VANITY LIGHT(for Front Side) INSPECTION

PROCEDURE


  1. INSPECT VANITY LIGHT ASSEMBLY (for LH Side)


    1. B006F4RC15
      *a

      Component without harness connected

      (Vanity Light Assembly)

      Inspect the vanity light assembly.

      Apply battery voltage to the connector and check the light illumination condition.

      OK
      Tester Connection Specified Condition

      N2-2 (B) - Battery positive (+)

      N2-1 (E) - Battery negative (-)

      		 Illuminates

      If the result is not as specified, replace the vanity light assembly.

  2. INSPECT VANITY LIGHT ASSEMBLY (for RH Side)


    1. B005THNC14
      *a

      Component without harness connected

      (Vanity Light Assembly)

      Inspect the vanity light assembly.

      Apply battery voltage to the connector and check the light illumination condition.

      OK
      Tester Connection Specified Condition

      N10-2 (B) - Battery positive (+)

      N10-1 (E) - Battery negative (-)

      		 Illuminates

      If the result is not as specified, replace the vanity light assembly.