VANITY LIGHT BULB REPLACEMENT

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. SEPARATE VANITY LIGHT ASSEMBLY


    1. A01RDNS

      Using a moulding remover, disengage the claw to separate the vanity light assembly.

  2. REMOVE VANITY LIGHT BULB


    1. A01R9SRC01
      B007Z37 Remove in this Direction

      Remove the vanity light bulb from the bulb holder as shown in the illustration.

  3. INSTALL VANITY LIGHT BULB


    1. A01REDEC01
      B007Z37 Install in this Direction

      Install the vanity light bulb to the bulb holder as shown in the illustration.

  4. INSTALL VANITY LIGHT ASSEMBLY


    1. A01RBK7

      Engage the claw to install the vanity light assembly.