SHIFT PADDLE SWITCH INSTALLATION

PROCEDURE

1. INSTALL NO. 1 SWITCH WIRE

   Tech Tips

   Perform this procedure only when replacement of the No. 1 switch wire is necessary.

   
   

   1. Engage the 2 guides to install the No. 1 switch wire to the steering wheel assembly.

2. INSTALL SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY)

   
   

   1. Connect the 2 shift paddle switch (transmission shift switch assembly) connectors to install the 2 shift paddle switches (transmission shift switch assemblies) to the No. 1 switch wire.

   2. Engage the 2 clamps.

   3. Engage the 4 claws to install the 2 shift paddle switches (transmission shift switch assemblies) to the steering wheel assembly.

   4. Install 2 new screws.

      Torque:

      1.7 N*m  { 17 kgf*cm, 15 in.*lbf }

3. INSTALL STEERING PAD SWITCH ASSEMBLY

   Click here

4. INSTALL STEERING WHEEL ASSEMBLY

   Click here