SEAT POSITION SENSOR(for Manual Seat) ON-VEHICLE INSPECTION

CAUTION / NOTICE / HINT

CAUTION:

Be sure to follow the correct removal and installation procedures of the seat position airbag sensor.

PROCEDURE


  1. INSPECT SEAT POSITION AIRBAG SENSOR (for Vehicle not Involved in Collision)


    1. Perform a diagnostic system check.

      Click here

  2. INSPECT SEAT POSITION AIRBAG SENSOR (for Vehicle Involved in Collision and Airbag not Deployed)


    1. Perform a diagnostic system check.

      Click here

    2. Visually check for defects with the seat position airbag sensor installed on the vehicle.


      1. The defects are as follows:


        • Cracks on the sensor housing

        • Dents on the sensor housing

        • Chips on the sensor housing

        • Cracks or other damage to the connector

        • Peeling of the label

        OK
        No defects are found.

        Tech Tips

        If any of the defects is found, replace the seat position airbag sensor with a new one.