STARTER INSTALLATION


  1. INSTALL STARTER ASSEMBLY


    1. A01E10K

      Install the starter with the 2 bolts and nut.

      Torque:
      69 N*m  { 700 kgf*cm, 51 ft.*lbf }

    2. Install the stay with the 2 bolts.

      Torque:
      37 N*m  { 377 kgf*cm, 27 ft.*lbf }

    3. Install the stay with the nut.

      Torque:
      12.3 N*m  { 125 kgf*cm, 9 ft.*lbf }

    4. Connect the terminal 30 wire with the nut.

      Torque:
      9.8 N*m  { 100 kgf*cm, 7 ft.*lbf }
    5. A01E0BH

      Install the terminal cap.

    6. Connect the starter connector.

  2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

  3. PERFORM INITIALIZATION


    1. Perform initialization Click here.

      Note

      Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.