DAYTIME RUNNING LIGHT ASSEMBLY INSPECTION

PROCEDURE

1. INSPECT DAYTIME RUNNING LIGHT ASSEMBLY LH

   
   
   1. 

      Text in Illustration

      *a	Component without harness connected (Daytime Running Light Assembly LH)

      Connect a positive (+) lead from the auxiliary battery to terminal 2 and a negative (-) lead to terminal 1.

   2. Check that the light comes on.

      OK
      The light comes on.

      If the result is not as specified, replace the daytime running light assembly.

2. INSPECT DAYTIME RUNNING LIGHT ASSEMBLY RH

   
   
   1. 

      Text in Illustration

      *a	Component without harness connected (Daytime Running Light Assembly RH)

      Connect a positive (+) lead from the auxiliary battery to terminal 2 and a negative (-) lead to terminal 1.

   2. Check that the light comes on.

      OK
      The light comes on.

      If the result is not as specified, replace the daytime running light assembly.