DESCRIPTION
This DTC is stored when the skid control ECU (brake actuator assembly) receives an internal malfunction signal from the steering angle sensor (spiral with sensor cable sub-assembly).
DTC No. | DTC Detection Condition | Trouble Area |
---|---|---|
C1433 | With the +BS terminal voltage between 9.6 and 16.5 V, a steering angle sensor malfunction signal is received from the steering angle sensor. | Steering angle sensor (spiral with sensor cable sub-assembly) |
PROCEDURE
REPLACE SPIRAL WITH SENSOR CABLE SUB-ASSEMBLY
Replace the steering angle sensor (spiral with sensor cable sub-assembly) Click here.
Tech Tips
If troubleshooting has been carried out according to Problem Symptoms Table, refer back to the table and proceed to the next step Click here.
NEXT |
END |